Search Results for:

The N-Lase – Our flagship range is equipped for any task, no matter the size or environment. Perfect for laser marking, etching, ablating, foaming, engraving or cutting a plethora of materials. Our laser systems offer an out-of-the-box solution for engraving metal, coated metal, plastic, glass, ceramic and organic products, making the machines a cost-effective and

Are you developing a product, service, or technology, in your business and need to: • Access university technical expertise and • Access government innovation funding to pay for it The Brunel RIEm Programme – free to SME participants – could help you. By the end of the programme you will know how to choose the

Traditional aircraft wing designs, though widespread, have some considerable aerodynamic drawbacks. The use of discrete control surfaces (Elevators, Rudder, Ailerons) to control airflow around the aircraft_ is known to cause flow separation, especially at the limit of control surface deflections. To meet the ever increasing demand for more efficient, robust, and cost effective designs, there

In competing with aluminium alloys as structural materials, magnesium alloys have advantages of low density, high strength ratio, better electromagnetic shielding properties and castability. These result in the preferential use of magnesium alloys in components where lightweight and electromagnetic shielding is critical. However, the currently used magnesium alloys have inferior thermal conductivity in comparison with

With augmented reality, Masmec can display a machine as a 3D virtual model on any surface or in the area where it will be installed, so as to evaluate its features and interaction with other equipment.

The electromechanical testing machines of the E2 series in a double-column benchtop or floortop versions up to 50kN are suitable for both R & D and regular quality control in laboratories and operations. Due to the great variability of the machines (different heights and widths) and in combination with a wide range of accessories, the

The electromechanical testing machines of the E1 Series in one-column benchtop design up to 5kN are designed for safe and efficient testing of materials and whole products in tension, pressure, bending, shearing and torsion. This line is characterized by an open structure and, depending on the type of equipment (except for the temperature chambers and

Electrodynamic Testing Systems STEP Lab produces systems for very high dynamic mechanical tests such as high cycle fatigue or on shock absorbers. We have the largest catalog of machines based on linear motors. We present our three actuator families: UD – For continuous dynamic testing over millions of cycles HUD – Suitable for high dynamic

Dynamic and fatigue test systems based on Electromechanical actuators. At STEP Lab we produce electromechanical actuators with unrivaled performance and great flexibility being suitable for both static and dynamic testing. In particular, they are prepared for fatigue testing. The EA dynamic and fatigue testing machine is suitable for tests in both force and position control

Epsilon’s very high resolution calibrator features 20 nanometers (0.8 microinches) resolution and has 50 mm (2 inches) of measuring range. The 3590VHR calibrator meets the accuracy and resolution requirements for ASTM E83 Class B-1 for extensometers with gauge lengths ≥6 mm, and meets ISO 9513 Class 0,5, both over the full measuring range of the

A single integral unit provides simultaneous, averaged lateral (transverse) strain and averaged axial strain measurement for determining modulus and Poisson’s ratio. The model 3560-BIA is extensometer is ideally suited for routinely measuring modulus and Poisson’s ratio of advanced composites and other anisotropic materials. Transverse strain is averaged and provided as a single output. Axial strain

Designed for general purpose transverse or diametral strain measurement on axially loaded specimens. This model may be used simultaneously with the Model 3542 axial extensometer. Self-supporting on the test sample, these extensometers will work on any width or diameter specimen from 0 to 25 mm (0-1 inch). Most often they are used simultaneously with Epsilon’s

Widely used for measuring deformations in three and four point bend tests, compression tests and a variety of general purpose deformations. These strain gaged devices come with a magnetic base for easy mounting. Deflection is measured with a single arm with an attached spherical contact tip, similar to those on a dial indicator. The full

Designed for use with furnaces and induction heating systems, these extensometers use Epsilon’s exclusive, self-supporting design. A wide range of options cover most testing applications. Epsilon developed this unique high temperature extensometer for testing metals, ceramics, and composites at the high temperatures produced by furnaces and induction heating systems. A combination of features make these

For fracture mechanics studies, these COD gages are in compliance with standardized test methods, such as ASTM E1820 for determination of fracture toughness properties of metallic materials. The Model 3541 is designed for determination of fracture mechanics parameters such as JIC, KIC, R-curve, fatigue crack growth rate (da/dN), and testing to standards such as E1820,

Small profile and ultra-light weight, these units are appropriate for testing small and delicate samples yet rugged enough for daily use on standard specimens. Ideal for strain measurement of wire specimens, sheet materials, and standard ASTM or ISO specimen geometries. Excellent for low and high cycle fatigue testing. Weighing as little as 8 grams, these

General purpose strain gage extensometers for axial tensile, compression, and cyclic testing. Gauge lengths from 20 to 80 mm (and 0.8 to 2 inches) and full scale measuring ranges from 5% to 100% strain. These extensometers are designed for testing a wide range of materials, including metals, plastics, composites and ceramics. All will perform both

Epsilon ONE® optical non-contact extensometers perform high-accuracy, high-resolution, non-contacting axial strain and displacement measurement. These extensometers are suitable for testing high-modulus materials such as metals and composites, high-elongation materials, thin or delicate specimens, cyclic fatigue, strain controlled testing, deflectometer applications, and measuring crack opening displacements. Strain or extension is measured and output in real time.

Located all around the world, the Safran Landing Systems Service Centers meet the maintenance and repair needs for commercial, business and regional aircaft as well as commercial and military helicopters.