ICBP® Flex is the most innovative and popular solution of ECM’s range of Low Pressure Carburizing furnaces. The modular and compact design of the ICBP® Flex meets the highest demands in terms of productivity and part quality. The ICBP Flex can assemble oil quenching cells (hot or cold), simple gas or reversible dual stream (up to 20 bar) quenching and heating cells. Their number depends on the required production capacity. ADVANTAGES COMPARED TO CONVENTIONAL FURNACE : - Flexibility - Improved productivity - Personal protection - Guaranteed performance - Repeatability

The ICBP® Nano composes one module with 3 stacked up heating cells (it can be extended to 6 heating cells, corresponding to 2 heating modules) and a gas quenching cell to cool the pieces. The carburizing cells are stacked up to reduce the footprint’s installation as much as possible. The installation allows better uniformity and repeatability from load to load while reducing distortions. Each cell is controlled independently, allowing it to work with different temperatures, gas injections and heat treating recipes in each cell. This makes it a flexible installation, compact and with improved productivity, ensuring the best treatment quality. ADVANTAGES COMPARED TO CONVENTIONAL FURNACE : – Improved productivity – Compact layout – Easy automation and Robotization – Repeatability

Vertical rotating tables with double 5-axis operating unit ikon is a 5-axis geometry machining centre with two vertical tables for the processing of aluminium and composites materials. Equipped with one or two horizontal operating units, it ensures high productivity. ikon allows a complete inner view by the operator.

An inclinometer is a sensor used for measuring angles, mainly for tilt, slope or elevation of an object with respect to gravity. They are known by several names such as tilt sensor, inclinometer or even pitch & roll indicator. The most common inclinometer is for measuring single axis X or dual axis X & Y axis however on request, the Z axis can be measured using a separate device. All incorporate the latest high-performance MEMs sensing technology and are further enhanced with internal compensation circuitry for high accuracy performance and long-term stability. The only other consideration should be the output required. Current outputs (4-20mA) can be used for long transmissions up to 2000 metres. Analogue outputs are most common having 0-5, 0-10V, 0.5-4.5V or even +/-5 or 10V. Digital output version are available such as RS-232, RS-485, TTL, PWM and CAN.

Introducing our industrial cost-effective pressure solutions, designed to provide accurate and reliable pressure measurements in a variety of industrial applications. Our sensors are engineered to deliver exceptional quality and performance, while remaining cost-effective for high volumes. We have combined some of the best manufacturers to ensure we can fulfil any requirement whether it be compressors, food, marine, off highway, heavy duty, ATEX approved (or even FM/CSA). With our industrial cost-effective pressure transmitters, you can expect reliable and accurate measurements of pressure, allowing you to monitor and control critical system parameters. Whether you need to measure pressure in a complex manufacturing process or ensure safety in a high-pressure system, our pressure transmitters are the perfect solution. Contact us today to learn more about our industrial cost-effective pressure solutions and how they can benefit your business.

Nederman heavy duty industrial hose and cable reels provide easy access to air, oil, water and power as retractable reels in aluminium or stainless steel, creating a safer and more ergonomic workplace by reducing the risk of trip hazards. Nederman retractable hose and cable reels improve workplace efficiency and safety with high quality, long lasting solutions that are easy to handle.

When you rely on your machinery day in and day out, whether it’s on the farm, a construction site, or tackling tough earthwork jobs, you need coatings that work just as hard as your equipment does. At Mipa, we understand the challenges your machines face: harsh weather, mud, chemicals, fertilisers, and constant wear from heavy use. That’s why our industrial machinery coatings are designed to do more than just look good. They provide robust protection against corrosion, resist scratches and impacts, and stand up to everything from blazing sun to pouring rain. Our topcoats and primers are easy to apply, dry quickly, and come in a wide range of colours, so your fleet can look sharp and stay protected. We know downtime is costly, so our coatings are formulated for efficiency, helping you get your equipment back to work faster and keeping it in top condition for longer. Whether you’re kitting out a new tractor, refurbishing a digger, or maintaining earthmoving equipment, you can count on Mipa for coatings that deliver lasting results and peace of mind.

ND Precision offer an injection moulding service across 3 moulding machines: ⬛ Babyplast Machine Machine Tonnage - 6 Tie Bar Spacing - 75mm x 75mm (But 75mm x 120mm is possible) Max Shot Weight - 12g ⬛ 10T BOY XS Machine Tonnage - 10 Tie Bar Spacing - 156mm x 156mm (196mm Diagonal) Max Shot Weight - 8g Additional Information - Babyplast attachment ⬛ 50T BOY Machine Tonnage - 50 Tie Bar Spacing - 296mm x 296mm Max Shot Weight - 121g NDPP are happy to run small batches or trials and large production moulding on any of the machines.