MINIATURE IMPELLER SENSOR AND FLOW COMPUTER The VCT is a turbine measurement system tailor-made for the flow measurement of almost any liquid, including agressive or flamable liquids. The VCT is ideally suited for road tests and in testing complex thermal management in vehicles with electric motors. The DDM turbine flow meter has a media-contacting thermocouple (VCT) has been specially developed for this purpose. The VCA flow computer processes data from the VCT flow sensor and converts it to a 0-10v signal for conection to an external DAQ. The compact size of both the flow sensor and flow computer means they can be easily installed, even when space is restricted. AT A GLANCE Compact size for east installation All wetted parts are stainless steel and Ceramic Built in signal pick up and processing Calibration data stored on the sensor (TEDS) - Can be used with any VCA flow computer Real-time viscosity-corrected and linearized flow rate is D/A converted and output as a voltage value Flow capacities from 0.5l/min to 350l/min

Interface Force Measurements are please to be able to offer DDM’s innovative range of small form pressure sensors to the U.K. Automotive Industry for the first time. Already widely used by automotive manufacturers and test houses in Germany, DDM’s sensors are designed to offer accurate flow and pressure measurement in applications such as • Fuel system pressure measurement • Coolant pressure measurement • Turbo charger pressure • Exhaust back pressure • Brake system fluid pressure • Crankcase pressure • Tank vent • Automatic transmission fluid DDM’s sensors are designed for both on vehicle and test bench use. All sensors feature a fully welded stainless-steel construction. Pressure ports and electrical connectors can be user specified to best fit your application. Pressure ranges start at 0.1bar, up to 2,000bar with working temperature ranges from -40⁰c to +150⁰C For more information please contact us on 01344 776666, e-mail info@interface.uk.com or visit our website, www.interfaceforce.co.uk

The SM1500-CP-30 is a 0V – 1500V 0A – +/- 30A DC Power Supply. Delta Elektronika’s SM15K series are full bi-directional regenerative series of high-power DC source / sink programmable power supply units based on Delta Elektronika’s grid-tied technology. With our latest DC bi-directional power supply models, we have extended our capabilities to a higher level of 15kW per unit. Standard feature for these power supplies is Delta’s new Power Recovery [Regeneration] Technology: in sink mode they can return full power back into the grid and, thanks to an efficiency of 95%, there is no need for expensive water cooling systems. The flexible output covers the output range of five separate power supplies with a traditional rectangular VI-curve.

Three degrees of freedom 360 or 600 mm, pick rate of max. 60/min.

Ensuring your core marketing foundations are in place is important to the success of any campaign. Once these foundations are built it’s time to start promoting your brand, products or services to your target audience. Our Areas of Expertise: + Online & Offline Lead Generation + Marketing Automation & CRM Integration + Internal Marketing + Events & Exhibitions + Inbound, outbound & account-based

Engineering definition and scale-up support for reliable, repeatable and commercially viable production.

This compact, high-performance Autoclave is designed for producing composite components efficiently and affordably.

Diffusion bonding is a solid state joining technology for bonding similar and dissimilar materials together. The interfaces that are to be joined only undergo microscopic deformation and the joint area is homogeneous and bonding materialises at the atomic level. Diffusion bonding is carried out in a vacuum furnace under pressure with specially designed tooling. Due to the possibilities which diffusion bonding can offer, developing highly intricate and complex components such as those seen in heat exchangers have become possible. Diffusion bonding can also be used for dissimilar materials such as stainless steel to copper or ceramics. Here at Mat-Tech we have been actively developing diffusion bonding solutions for Big Science projects.

Immersive content to stimulate and support technical evaluation through 3D animation, VR and AR platforms

Kieron Salter's Digital Manufacturing Centre, located at Silverstone Park, is one of Europe's premier additive manufacturing facilities and has plans make an impact in the space sector. Since opening in 2021, the DMC has already produced hundreds of thousands of parts for hypercars, F1, motorsport, space and defence sectors – including high profile projects like the Gordon Murray T50 and Mclaren Solus GT where high performance and lightweighting are critical. In many ways, the business is pioneering the art of additive manufacturing in motorsport. The DMC has also been a manufacturing partner for major Tier 1 contractors to defence through MOD Project Tampa. It already has parts flying in space applications. The business employs over 20 people at its bespoke 18,000 sq ft facility at Silverstone Park

Online channels are often where prospects experience their first interaction with your business and brand, so a strong first impression is vital to enabling business and sales growth. Increase audience reach and improve your business’s online presence with a combination of digital marketing services. Our Areas of Expertise: + Search engine marketing + Online advertising including PPC + Business social media management + Online reporting & analysis + Conversion rate optimisation (CRO)

Put your 3D data to work with Unity Industry Import without cleanup. Reuse assets across teams. Automate builds and deploy to all platforms—backed by on-demand training to get your team moving fast.