The Relyence® Reliability Prediction software supports the worldwide accepted standards for MTBF (Mean Time Between Failures) analyses: MIL-HDBK-217, Telcordia, 217Plus, NSWC Mechanical, ANSI/VITA 51.1, China’s GJB/z 299, and NPRD/EPRD. All facets of the standards are supported including hybrid modeling, early life dropout, and the use of test and field data. Relyence Reliability Prediction offers a robust feature set with all the capabilities you need for comprehensive analyses. The long list of features includes supplied part component libraries, BOM (Bill of Materials) importing, Intelligent Part MappingTM, What-If? analyses, system modeling, cross-module integration, derating analysis, allocations, graphical dashboards, and much more. Our reliability calculation software is designed to make the task of doing MTBF predictions easy, straight-forward, and accurate. Our failure rate calculator tool is fast and precise, using optimal default data as needed to perform calculations. It’s built to handle your continual product development cycle from early stage with minimal input to late stage when detailed design parameters are known.

The removable fixed feature of the bush is normally used in high production work, where the bush can be easily and quickly replaced with a minimum loss of production. The removable slip feature of the bush is used when more than one operation is carried out; the bush is instantly removable after each operation.

Our repacking and material handling capabilities means TECHSiL are equipped to transfer the contents of large primary containers into small packs. Allowing us to supply products in a format to meet your exact dispensing requirements, reducing production errors, wastage, and simplifying your manufacturing and logistics processes. Formats TECHSiL can repack into include syringes, cartridges, sachets or single use packs, tubs, pails, drums, and more. We can also supply UN approved containers. For more information, view TECHSiLs repacking options. TECHSiL is an authorised repacker for Momentive materials.

For nearly 50 years, Airtech has been the recognised leader in vacuum bagging & resin infusion technology; delivering reliable performance and innovative solutions since the earliest use of composites in Marine applications. Airtech can supply a full range of composite materials for resin infusion processing of all commonly used resin systems e.g. polyester, vinyl ester and epoxy. Our range includes: Peel Plies Perforated Release Films Resin Distribution Mesh Vacuum Bagging Film Vacuum Sealant Tapes Vacuum Manifolds Resin Feeds Spray Adhesives Vacuum Reservoirs Through Bag Connectors

Resistance wire heating elements are based on traditional wire heating technology and come in a variety of shapes. For all wire heating elements, a special metal wire serves as heat source. The heating conductor heats up due to its electrical resistance when being supplied with current. When designing a resistance wire heater, the heating conductor’s alloy and shape are most important next to the power output. Therefore, a selection of round and flat wires of various alloys and cross-sections is available. The selected heating conductor usually becomes a winding part on insulation material, such as ceramic or Micanite, or a spiral for tubular heating elements and heating cartridges

Retort type furnaces can be used in a variety of ways. Be it for tempering and annealing of tools previously processed in vacuum hardening furnaces, as well as for a number of other heat treatment processes. The latter include in particular the processes of gas nitriding, nitrocarburizing in conjunction with corrosion-protective post-treatment (oxidizing). Our retort furnaces are available in a wide variety of designs. You can choose between electric heated or gas heated versions.

The REVO system uses 5-axis measurement technology to minimize CMM motion at ultra-high measurement speeds. The REVO-2 head achieves fast and accurate measurements with its flexible tip-sensing probe by letting the head to the work while the CMM moves in a much slower, linear fashion. This probe, coupled with a tailored CMM, gives the system added accuracy and performance. The removable probe system, used in conjunction with a low-cost changer, gives the system added flexibility.

Formulated as an epoxy-based composite primer/surfacing film, our new RF Primer film is fully compatible with our epoxy prepreg systems and provides a sacrificial surface that enables the constructor to eliminate paint priming. The film is laid as a first layer and then backed up with a prepreg laminate. It will fully co-cure with our epoxy prepreg formulations and will reduce the time required for surface preparation, thereby reducing cost-per-part.

The all new GTC power * high-performance roughing, even at high cutting depths * high metal removal rate and great running smoothness * exceptional process reliability, even for difficult-to-machine materials

RFA570 is unique product which has been principally designed for use with RP570 and RP570 FR eXpress cure epoxy prepregs, as an adhesive for core bonding applications. The distinctive characteristics of this product enable it to be cured in a press in 4 minutes at 140°C, thereby speeding up the processing of honeycomb sandwich panels - with either nomex or aluminium honeycombs. The product will also cure in autoclave, with a typical curing cycle of 4 minutes once the tool temperature has stabilised at 140°C. It is fully compatible with our full range of epoxy prepreg systems.

Our Best-Seller Multi-Purpose Rhino Heavy Duty Cutting Mat is a great solution suitable for large applications and fabricating environments where a heavy duty cutting mat or workbench protection mat is needed. The Original and the best with class leading thickness for extra longevity and durability.

A metal workbench for schools, homes, factories and workshops with a UDL of 800kg Four sizes of steel workbench are available with full user instructions. Overall Height of 900mm with 18mm MDF Top. 16mm Grey Trespa ® High Pressure Laminate Tops which are chemical, scratch and heat resistant also available. Contact us for Pricing. Powder-coated metal frame for corrosion protection and smart look. This work table includes heavy duty lockable metal castors. Designed and fabricated in the UK. 5 year warranty on the whole range.

Our SupaSeal Grey cutting mats offer long term durability and exceptional self-healing properties and provide a perfect cutting surface. SupaSeal Grey cutting mats are a Solid Grey colour ensuring a smart look which offers the same properties as the Clear Supaseal.