We offer over moulding solutions such as cable overmould and assemblies and connector overmoulding

The Stratasys Origin One is a transformative 3D printer enabling mass production of end-use parts in a diverse range of high-performance materials. Achieve industry-leading accuracy, consistency, detail and throughput with the P3 Programmable Photopolymerization technology.

Pacific Instruments, Inc. is an industry leader in the design, manufacture and support of state-of-theart, computer-automated physical measurement systems. Major aerospace and vehicle companies, government-funded research agencies and the military use these systems to measure, store and analyse information and results from research and development projects. Pacific Instruments’ advanced computer technology is enabling these companies to efficiently solve real-world problems in such areas as passenger safety, earthquake building design and survivability, explosives technology and containment, aircraft engine and air foil design and general scientific research. Our Range covers: Engine Test Stands - Rocket & Turbine Wind Tunnels - Large, Small, Static & Dynamic Structural Testing - Aerospace, Civil & Seismic Energetic Testing - Explosive, Artillery & Shock

Dispatch is where good production goes wrong at the last moment A job can run perfectly through production and still leave the building incorrectly. Wrong quantities, missing items, no record of what went where – dispatch errors are expensive, and they are the ones customers notice most. Pick items, pack into containers, create the shipment – all in one place When a sales order is ready for dispatch, it appears in the Pending tab of the Dispatch screen. Select the items, create a dispatch task, and hand it to the dispatch team. From the Advanced Interface, operators open the task, pick each item to transit, then pack items into the appropriate container type. Once packing is complete, the shipment is created from the Unshipped Packing Items tab. Every item packed, every container used, and the shipment reference are all recorded against the original sales order – with a full audit trail back to the work order that produced the goods. Configure boxes, crates, and pallets that nest the way your despatch team actually works Packing Types are configured with a hierarchy level – boxes sit inside crates, crates sit on pallets, pallets go on to vehicles. The system enforces the hierarchy: a smaller container can be packed into a larger one, but not the other way around. No mis-packing. No items assigned to a container that cannot hold them. Configure as many packing types as your operation needs – by weight class, product family, customer requirement, or courier specification. Each type is named and assigned a level number. The dispatch team selects the right container on the touch screen when packing. When speed matters more than packing complexity, dispatch in one click For straightforward despatch – where items go directly from production to the customer without complex packing – Auto Dispatch handles the whole process in a single action. Open the sales order or the dispatch pending tab, select the items, enter a dispatch reference, and confirm.

TECHSiL offers a bespoke labelling and barcoding system, which can be set up to meet your exact requirements. Where special packaging is required, TECHSiL are able to offer a wide range of bags and other wraps in a range of UV-proof, anti-static or metallised materials. We also have a trained team to offer shipping for hazardous materials. For more information contact sales@techsil.co.uk

Throughout the group we can offer wet paint coatings, pre- treatment, dry film lube and varnish. Paint has now received approval to proceed with Airbus on structural paint Each site has fully qualified operators with many years of experience in all types of painting and related processes who can handle small intricate components as well as larger parts. At SWMF we have a Junair spray booth and paint mixing room. Currently the company has 4 separate wet paint areas carrying out a number of paint processes from the aerospace industry to commercial and domestic requirements.

CBE+ has a dedicated spray paint facility on site. We can paint a range of materials in a variety of colours.

The pallet magazine PALOMAT® Greenline automatically stacks and destacks empty pallets. The user inserts or removes the pallets using a stacking truck or fork lift truck. All pallet handling takes place at floor level. The PALOMAT® Greenline detects the pallets using photo sensors and automatically stacks or destacks them one by one.. *It only requires a 230 V power supply *When selecting destacking, the PALOMAT can handle a stack of up to 15 or 25 pallets, which are then destacked automatically *When selecting stacking, the pallets are inserted one by one and automatically stacked to a maximum of 15 or 25 pallets. The entire stack can then be removed *The Palomat® Greenline operates fully automatically. It is ONLY manually operated via the touch panel when switching between stacking and destacking PALOMAT® Greenline is a standard model but can accommodate a wide variety of pallet types and sizes, with custom solutions available for specific customer needs.

The PARATUS® Change CLASSIC is our flagship model, offering a proven solution for pallet changes in less than 30 seconds. The patented method by which the pallet under the goods is changed (rather than the goods themselves) is the key to the product’s efficiency. The heavy-duty slider on roller bearings allows you to effortlessly slide out the start pallet with the target pallet. The integrated spring mechanism ensures that the slider is automatically returned so that the start pallet can be conveniently removed. This simple yet ingenious operating method offers maximum efficiency and reliability. The PARATUS® Change CLASSIC is mounted on the floor at a location of your choice using up to 18 mounting holes, ensuring it is always ready for use and optimized for long-term process efficiency. *multiple-reinforced construction *premium quality: made in Germany *powder coating *smooth, shiny surface *anthracite grey RAL 7016 *special colour possible *stainless steel possible *size depending on pallet

Patterns and Moulds Ltd Brochure

Using advanced surface-mount technology, we achieve fast, accurate PCB assembly for even the smallest modern components.

Manufacturing printed circuit boards with Openair-Plasma® Reducing operating costs and increases efficiency

By using solid PCD the manufacturing method of the heli-flute remains completely flexible to the customers’ demands. The constant helix evenly distributes the cutting forces across the width of the part reducing delamination. However, a variable helix tool can also be supplied to aid harmonic suppression. The heli-flute has produced excellent results machining both aluminium and CFRP.

Peel 3D scanners are designed to deliver high-quality 3D scans with exceptional ease of use, making them an ideal choice for entry-level scanning applications. Its user-friendly interface, combined with advanced scanning capabilities, ensures that businesses can achieve precise and reliable measurements without extensive training or expertise. Peel 3 is a groundbreaking 3D scanner that combines advanced technology with user-friendly features, making high-quality 3D scanning accessible to everyone from hobbyists to professionals. Peel 3d.CAD is a complete reverse engineering solution that includes a 3D scanner and fully integrated scan-to-CAD software, enabling you to seamlessly transform your 3D scans into precise CAD models. Whether you’re involved in engineering, product design, art, or education, Peel 3 and Peel 3d.CAD empower you to unlock new possibilities and bring your creative visions to life with unprecedented accuracy and ease. Enter into a world where innovation meets simplicity and discover the tools that are redefining 3D scanning and design.