Discover more about Easyfairs' engineering events around Europe!

Entropy Resins® High Performance Biobased Epoxy Systems. Epoxies for Coating, Laminating, Casting & Compression Moulding. Entropy Resins and Super Sap technology stand for more than environmentally-friendly epoxy products and uncompromised performance. We use third-party laboratories to measure biobased content. We participate in the USDA Certified Biobased Program. We also do extensive Life Cycle Assessment. This gives you and your customers peace of mind that our component in your end-product is more environmentally-friendly than the industry standard.

Instron environmental chambers provide extensive temperature testing capabilities for evaluating material properties under non-ambient testing conditions.

EnviroRinse™ 201 is a water-based, low foaming rinse aid offering corrosion resisting properties on assembly parts for up to 2 years. The purpose of this data report is to evaluate EnviroRinseTM201 (ER201) performance in an aqueous parts washer. The results and associated observations are detailed to show the effectiveness of the product. It was found that ER201 was stable over the 4-week period with minimal foaming and no alarms relating to the rinse tank occurred on the machine. The data followed a trend, the conductivity of the solutions increased throughout the trial however this was down to the top up of water into the tank. The dosage pump was set up to inject 20ml of ER201 every rinse cycle into the rinse tank, this maintained the concentration with no manual additions needed throughout the 4-week period. In no circumstance did any personnel need to intervene with the rinse tank and this ran fully automated by the machine. A full inspection regime was carried out on the parts that had been processed through the ER201 with positive feedback of the appearance of the components from a Hydraulics assembly manufacturer’s personnel. Lake Engineering Solutions provided a full SOP and training upon implementation of ER201 on the machine. This promoted a good practice for handling parts, and monitoring the solution now is minimal as it will be done in an automated process with the machine’s water top up and dosage pump. Full data has been given to underpin the effectiveness of the automated dosage system and Lab data to support EnviroRinse ™ using industry ASTM Standards (ASTM D4627-92: Iron Chip Corrosion for Water-Dilutable Metalworking Fluids and ASTM D1748-10: Rust Protection by Metal Preservatives in the Humidity Cabinet).

HIGH QUALITY Three-stage filtration system with blowback function to remove fume, equipped with permanent filter element. Stable beam and power control to prevent porosity, micro-cracks, and non-fusion defects. Optimized gas flow design for uniform printing of full-format parts. HIGH EFFICIENCY Supports four different printing configurations: single, dual, triple, and quad laser. Independently developed software for optimized scanning strategies, reducing processing time. REAL TIME MONITORING & HIGH SECURITY Real-time monitoring of working environment and air source for safety. CE and FDA laser safety certifications ensure high safety standards. Designed to prevent mis-operation, electric shock, fire, waste, and pollution. Closed system design for both powder usage and recovery processes. HIGH INTELLIGENTIZATION & AUTOMATION User-friendly interface with automatic one-click printing and pickup function. Displays build job information and traceable printing parameters report.

Eplus3D SLS polymer 3D printers are flexible machines for industrial grade production and research. We also provide advanced processes for industrial SLS 3D printing with the most various polymer materials optional, including polymer material PA12, PA12GF, PA11, PA11CF, TPU etc. with high performance of mechanical properties for functional test and end products. Contact us and get more information about Eplus3D SLS 3D printers for sale.

Von Roll provides a comprehensive spectrum of semi-finished and machined composite laminated products for electrotechnical and industrial applications. Typical applications include electrical insulation, paper machines, medical equipment, pumps, pallets for PCB soldering, electrical testing and ballistic and thermal protection.

The ESTA series of down draft tables are well suited for industries that work with metal dusts, Plastic dusts, CFRP-/GFRP dusts, Stone dusts, as well as vapours and welding fumes. Activities where these contaminants may be present include machining, mixing, grinding, ect. Different sizes are available depending on the user's needs and both stationary set up and mobile set up are available. The table is highly adjustable, and is available in a standard set up ( no panels ), with side panels, and finally with a back wall extraction panel as well.

The ESTA Dustomat Dry series of compact dust extractors are suitable for applications that include plastic, composites, and metals, possessing a separation efficiency of up to 99.995%. The Dry series can configured in multiple configurations, including activated carbon options, HEPA Filtration, variable speed drives, W3 option for welding and for dust applications ATEX certification.

The Dustomat Hydro is a compact wet filter unit suitable for multi and single station extraction of metallic dusts & sparks produced during applications including welding, polishing, & grinding. For explosive materials an ATEX compliant version is available. The Hydro series utilised water separation technology; the first stage filter possessing a separation efficiency of 98.7% subsequently remedying sparks and dusts effectively harmless. Contaminants extracted are effectively bound in water which can be then discharged via a drain cock located at the bottom on the unit. The extracted air is then fed through a multi-stage filter system which can be configured according to the user's individual needs and intended application. For particularly hazardous dusts , a Hepa H 14 filter is recommended ( possessing a separation efficiency of >99.995%, allowing clean air to be exhausted back into the atmosphere. Key benefits of the Dustomat Hydro include low operation costs, user friendly maintenance operation, and economical water & energy consumption.

The ESTA TK are a series of small dust collections for occasional operation in workplaces with low volumes of dust. Their small, compact design nakes thenm a very convenient solition for many and are suitable for industries that predominantly work with emtal dusts and shavings. The TK series can be used as both single workstation extraction nd direct extraction from another machine. They are very easy to operate and set up and offer numerous beneits, includingl low operationg costs, included dust collection frawer, low maintennace costs, and small space requirements. Special versions are also available depending on the user's intensions, including; a custom paint finish, a side channel blower for high negative pressure, portable frame, Motor in A/C and third-phase A/C current, and filter material for fine dust

Numerically controlled machining center designed according to CMS’ philosophy: the machine is the result and culmination of experiences developed in the aerospace and automotive sectors. The structure and the technical solutions adopted, along with the selected components, ensure a highest level of component finish, high machining speeds, reliability, structural rigidity, operating flexibility and outstanding productivity. ethos machine is also available with: - APC extractable tables allow the loading and unloading outside the working area - rotary table (TR): simplifies loading/unloading outside the machine and allows pendulum cycle using the complete working area - double bridge with twin operating units - 5-axis hybrid solution: milling + waterjet cutting system with catcher - fully automatic universal system for holding complex shaped parts (UHF), designed and produced by CMS

With EVORIS, Dieffenbacher has developed a new approach to the digitization of plants for composites and metal processing. Assisted by artificial intelligence, the digital platform EVORIS is a smart software solution for the digitalization of hydraulic press systems and complete forming plants. The software helps to make manufacturing processes more transparent and efficient. The cross-plant and manufacturer-independent platform measures, collects and stores process and component data in a central location. Various apps use self-learning AI and machine learning algorithms to transform the data into useful information for you. Improve your processes, increase machine availability, optimize maintenance, save costs and as a result, achieve a higher production capacity and components of the highest quality.

Sign up to here for more about exhibitor opportunities at our upcoming events!