Skip to content
Permabond Engineering Adhesives Limited
About us
Permabond is a manufacturer of engineering adhesives providing bonding solutions throughout industries using composites for light weight product design. Adhesives offer an effective way of joining composites, helping maintain the structural integrity and performance of your composite material, whilst giving a high-strength, high performance bond and an aesthetically pleasing appearance. Our composites adhesives range includes polyurethanes, single and two part epoxies developed for bonding carbon fibre and other composites as well as rapid curing and gap filling structural acrylics. Visit our stand to discuss your specific requirements. If possible, bring your components with you and we will be happy to help you find the best adhesive for your application
Products
Permabond TA4246
PERMABOND® TA4246 is a 2-part, no-mix, room temperature curing structural adhesive. It is ideal for use on a wide variety of substrate materials and forms a very high strength structural bond with excellent environmental durability and chemical resistance. It has high peel strength and excellent impact resistance and can be used to replace rivets or welding to give a more lightweight, durable assembly. Use with Permabond® Initiator 46.
Permabond PT326
2 part polyurethane adhesive ideal for bonding composites such as carbon fibre and interior trim. Find TDS at: https://www.permabond.com/wp-content/uploads/2016/04/PT326_TDS-1.pdf
Permabond® ET5428 & ET5429 for high strength bonding of carbon fibre and other composites
ET5428 and ET5429 are thixotropic two part adhesives with excellent resistance to impact and vibration. The controlled flow properties as well as ease of mixing and application enables the adhesives to be used where gap filling up to 5mm is required. Exceptional performance even at elevated temperatures. Available in black or cream for an aesthetically pleasing finish on carbon fibre and FRP.
Permabond TA4605 & TA4610 - Bond untreated Polypropylene, Polyethylene and PTFE!
Structural bonding of low surface energy plastics, polyprolylene, polyethylene & PTFE. No surface treatment necessary! Permabond TA4605 & TA4610 structural acrylic adhesives, offer impressive shear strength and even achieve substrate failure in pull tests on these traditionally difficult to bond plastics (see how the lap shears in the image have stretched, distorting the bonded material but the bonded joint has remained intact). No need for flame, corona or plasma treatment. Available in a range of cure speeds for large an small components. Download our brochure here: https://www.permabond.co.uk/single-post/2017/10/31/Polyolefin-Bonding-Adhesives---Flyer-download
Permabond TA4207 - Fast cure, high strength acrylic for carbon fibre & other composites - little or no surface preparation required!
NEW for 2019! Permabond TA4207 is a convenient, multi-purpose, fast cure, 2-part, 1:1 adhesive, which achieves very high shear strengths on carbon fibre, other composites, metals and plastics, with little or no surface preparation. Can be applied with or without mixing nozzles (bead on bead) and available in 25ml syringes to remove the need for a dispensing gun, or in 50ml and 400ml cartridges. Bulk available on request.
Permabond ET5422 - Ultra High Strength Structural Epoxy Adhesive
Originally developed for a spacecraft project and later adopted by an aircraft parts manufacturer, this high peel strength epoxy achieves exceptionally high structural bond strength and performance. The material is fully toughened with second generation core shell rubber technology, to offer excellent impact, vibration, peel and shear strength.
Permabond TA4630 & TA4631 No Odour Polyolefin Bonders - also great on rubber, PET, PEEK and acetal!
Permabond TA4630 & TA4631 no odour structural acrylic adhesives for low surface energy plastics such as polypropylene, polyethylene and PTFE also achieve impressive results on rubber, PET, PEEK and acetal (POM)! Both products offer rapid cure. TA4630 is black with micro beads for larger gaps and TA4631 is translucent without micro beads for narrow bond lines.
Permabond TA4550
New structural acrylic multi-bonder with exceptional performance on Nylon!
Permabond ET503
Fast curing, two-part epoxy adhesive which offers rapid strength development without compromising on bond quality.
Permabond UV643
Ultra-fast UV-curing adhesive, designed to bond both rigid plastics and a wide variety of thermoplastics.
Permabond 130 UVCA
A dual-curing cyanoacrylate/UV adhesive, designed to offer the best of both of these adhesive technologies – it’s a heavyweight shadow bonder with a light touch!
Permabond 712
A cyanoacrylate adhesive has been designed to offer superior bonding performance in harsh environmental conditions, including underwater submersion, heat and humidity.
Permabond TA4208 Black
A multi-purpose, high viscosity, non-slumping toughened acrylic with a jet black finish. It bonds well to many substrates including metals, plastics, composites, ceramics and woods.