Your reliable partner for drying, storing, and tempering 3D printer filaments for maximum part performance. MAXIMIZE YOUR PART'S PERFORMANCE The DRYCON is the only dual-chamber machine on the market that combines three functions: drying, storage, and tempering. It was designed to be the perfect partner for your 3D printer, helping you unlock the full potential of your additive manufacturing process. DRYCON Delivers Quality Improve the quality, strength, and durability of your 3D prints. Through drying, optimal storage, and tempering, you ensure your parts perform at their best and are durable. WHY DRY FILAMENTS? Improves Print Quality Hygroscopic filaments absorb moisture, leading to bubbles, holes, and poor layer bonding. Drying ensures a smooth surface and higher print quality. Increases Print Success Rate Moisture in filaments leads to irregular flow, causing under- or over-extrusion, stringing, and bleeds. Drying filaments can reduce print errors and failures. Keeps filaments print-ready Completely dried and optimally stored filaments save valuable time. Drying saves you the time required for pre-printing steps, allowing you to start printing immediately. Ensures dimensional accuracy Wet filaments expand unevenly during printing, leading to warping and inaccuracies. Drying ensures precise prints by preserving the material's original shape. Improves mechanical strength Prints made with wet filament are weaker and prone to cracking. Dry filaments, on the other hand, ensure better layer adhesion and more robust prints.

Membership of the British Institute of Non-Destructive Testing is a recognition of an individual or organisation's professional status within this vital sector of the engineering industry. Membership of the British Institute of Non-Destructive Testing is open to anyone or any company working in or having an interest in NDT, condition monitoring, diagnostic engineering, or materials and quality testing in general. Individual members range from students embarking on engineering, physics, metallurgy or a wide range of other courses, practitioners in the hands-on world, managers and academics, to research scientists. Company members come from an equally diverse range of industries – aerospace, power generation, oil and gas, petrochemical, universities to name but a few – as well as the equipment manufacturers and providers of specialist services, and consultancies. Company members are automatically members of the Institute's Industry Group

Bluehill Elements Software, built on the Bluehill platform meets the requirements of simple tension, compression, flexure, peel, and tear testing.

Bluehill Fracture is a dedicated fracture mechanics software from Instron. Machine control, data analysis and reporting are performed for metals fracture toughness measurement to key international standards.

Bluehill® HV Software is specifically designed for the Instron® HDT and Vicat testers, both of the previous and current generations.

Bluehill Impact with it's easy-to-understand icons and workflows, make it easy to train new or experienced users allowing you to start testing even faster than ever before.

Bluehill Universal is built from the ground-up for touch interaction. The new portrait layout, with its meticulously crafted visual design, gives the most comprehensive view of the test workspace on the Operator Dashboard, a stunning large-format touch monitor with an integrated controller. Intuitive workflows make it easy to train new or experienced users, simplify operator training, and allow you to start testing even faster than ever before.

A board mount or board mountable pressure sensor or pressure transducer is typically mounted onto a printed circuit board (PCB) and used to measure the pressure of gases or liquids. The media to be measured is transferred to the sensor via a small plastic tube or the pressure sensor needs to be in contact with the media to be measured such as a barometric air pressure sensor, air flow, pitot tube pressure Pressure sensors options include gauge, absolute or ultra low pressure differential pressure reference and usually from 2 inch of water column to a maximum of 300 PSI. The sensing technology used is Piezoresistive or MEMS (micro-electromechanical system) which is effectively a strain gauge whose resistance changes due to pressure variances. Pressure transducers are available with analogue or digital I2C or SPI interfaces.

Bond-Wipes have been developed and tested on a range of vehicle body substrates. The lintfree wipe is the very best in robust cleaning and surface preparation, removing contaminates, positively changing surface tension resulting in greatly enhancing long-term adhesion.

From structural bonding in the automotive and aerospace industry to high-tech adhesive bonding in the electronics industry and even simple wet labelling: Openair-Plasma® pretreats the bond surface with precision, creating an even and process-reliable base for industrial adhesive bonds while at the same time ensuring sustainable process design. The use of cleaners and solvents containing VOCs is eliminated, as is the frequently necessary cleaning and drying of component

Ergonomic assembly workstations Ergonomic working In today’s workplace, there is a growing emphasis on the physical and mental well-being of employees – and for good reason. Prioritising well-being not only creates a more relaxed and enjoyable working environment but also significantly boosts productivity. A key step towards this is creating a comfortable and adaptable workspace. Our ergonomic assembly workstations ensure that employees work in comfort and safety. The height-adjustable shelves and assembly benches can be modified without tools, allowing workers to maintain an optimal posture. This flexibility in working height helps to keep both the body and mind energised, ensuring greater efficiency and long-term well-being. With avero from bott, you can secure the workplace of the future, promoting efficiency, ergonomics, and safety in your operations. In today's industry and production sectors, the demands on workplace design for manual assembly have grown significantly. The avero modular system equips you to handle the constant shifts in production requirements. With height-adjustable workstations - which can be modified either electrically or with a crank - avero ensures flexibility. Our experts collaborate with you to design customised assembly workstations, tailored to fit your specific processes. We also offer pre-configured options, such as packing tables, and can deliver your workstation entirely in ESD design if needed. The avero workstation system offers much more than a traditional workbench. Swivel frames allow tools and materials to be positioned conveniently within the left and right outer gripping areas, enhancing accessibility and efficiency. Our robust and durable worktops ensure longevity, while the wide range of practical accessories helps keep tools and equipment organised, streamlining your workspace.

Development of Silverstone Park includes open break-out spaces, pathways, cycling routes and landscaped grounds for occupiers' employees to enjoy. In 2022-23 alone, more than 9,000 hedge, shrub, marginal and aquatic plants, plus 230 trees, were installed.

Advanced 2D and 3D CAD software for professionals, combining powerful drafting tools with intuitive modelling to boost productivity.